wago.s.8 MPa; 0.
To properly commission products, the following environmental requirements must observed during storage, transportation and operation.
General Environmental Requirements for WAGO Electrical Interconnection Products
.** 125 125 °C
RTI impact per 746B 105°C 100°C 115°C 115°C 125°C 120°C
Heat deflection temperature (HDT/B) per ISO
75 (bending stress A*: 1.
WAGO Electrical Interconnection Products are designed for worldwide applications.45 MPa)
215°C 235°C 285°C 280°C
130°C
(1.com
WAGO Rail-Mount Terminal Block Systems
Material Specifications
Material Specifications
WAGO primarily uses polyamide (PA and 46) for housing current-conducting parts, well polyphthalamide (PPA) and polycarbonate
(PC) for insulation material (see table).8 MPa)
130°C
(1.30
www. not specified
Table General Environmental Requirements for Storage, Transportation and Operation*
Environmental requirements during Value range
Operation -35 +60 °C
Storage and transportation -40 +60 °C
Relative humidity (storage and transportation) (non-condensing, dew)
*These requirements apply open and packaged products unless otherwise specified the product www.wago. For more than years, these materials have proven themselves WAGO products and all are
approved certified, third-party agencies.8 MPa)
Surface resistivity per IEC 60093 1012
Ω 1012
Ω 1015
Ω 1013
Ω 1015
Ω 1015
Ω
Specific contact resistance per IEC 60093 1015
Ω/cm 1015
Ω/cm 1013
Ω/cm 1013
Ω/cm 1011
Ω/cm 1013
Ω/cm
Dielectric strength per IEC 60243-1 kV/mm kV/mm kV/mm kV/mm kV/mm kV/mm
*Value depends wall thickness, 60335 compliance upon request; **n.
Insulation materials
Table: Standard Insulation Materials
Material PPA PC
Flammability
UL flammability test ratings
V0 V0
Oxygen Index (OI) per ISO 4589-2 %
Glow-wire test per
IEC 60695-2-12 GWFI*
IEC 60695-2-13 GWIT*
850°C
775°C
850°C
775°C
850°C
775°C
750°C
725°C
800°C
850°C
960°C
850°C
Comparative Tracking Index (CTI) per IEC
60112
600 600 600 375 225 225 V
Temperature the ball indentation hardness
test per IEC 60695-10-2
≥ 125 175 225 n. All listed halogen-free and flame-retardant polymer materials not contain any heavy metals,
silicone, asbestos, formaldehyde formulation components.com the catalog page
