• Prevents fresh oxidation the clamping
point.wago.1)
WAGO Lighting Connectors
Push nozzle the “Alu-Plus” syringe first into the circular
entry and then into the square conductor entry hole the
WAGO Lighting Connector. Filling quickly performed selected
WAGO connectors and terminal blocks (see pictures).
Using terminal blocks with CAGE CLAMP®
Spring Pressure Connection Technology,
aluminum conductors must first cleaned
with blade and then immediately be
inserted into the clamping units filled with
“Alu-Plus” Contact Paste.4.
“Alu-Plus” Contact Paste Advantages:
• Automatically destroys the oxide film during
clamping.com
WAGO Rail-Mount Terminal Block Systems
Technical Information
“Alu-Plus” Contact Paste
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suit-
able for solid aluminum conductors to
4 mm²/12 AWG WAGO “Alu-Plus” Contact
Paste used for termination.
WAGO “Alu-Plus” the syringe offers higher degree of
reliability and cleanliness when terminating solid alumi-
num conductors.5 mm² (14 AWG) A
4 mm² (12 AWG) A
Press plunger down until the “Alu-Plus” has filled both
entry holes.
Note: Not suitable for higher temperature applications!
Press plunger down until “Alu-Plus” has filled all conductor
entry holes.
• Provides long-term protection against cor-
rosion.
Terminating aluminum conductors
.
1 Aluminum conductors per IEC 61545 standard, Class B,
“Alloy 1370” with 180 N/mm² tensile strength and 1
… elongation
Standard values: 180 MPa tensile strength, 4%
elongation (per 615.29
www.
WAGO Rail-Mount Terminal Blocks (up mm²/12 AWG)
For each conductor entry: Insert nozzle the “Alu-Plus”
syringe every open conductor entry hole (one after the
other).
Please note that the nominal currents must
be adapted the reduced conductivity of
the aluminum conductors:
2.
It also possible apply WAGO “Alu-Plus”
additionally the whole surface the alu-
minum conductor before termination.
• Prevents electrolytic corrosion between
aluminum and copper conductors (in the
same terminal block)
