In accordance with DIN 18014, connect the founda-
tion earthers each individual foundation the low-
est storey into closed ring. 5018 for marking
earthing lugs
TBS
Blitzschutz-Leitfaden
2018
/
en
/
2020/01/10
14:42:40
14:42:40
(LLExport_02613)
/
2020/01/10
14:42:54
14:42:54
157
Chapter The external lightning protection system
. with the OBO Protec-
tionBall. The holders must inserted at
a distance approx.g.TBS
Blitzschutz-Leitfaden
2018
/
en
/
2020/01/10
14:42:40
14:42:40
(LLExport_02613)
/
2020/01/10
14:42:54
14:42:54
Earth rods (optional)
Ring earth electrodes
Main earthing busbar(MEB)
Installation principle, foundation earther with functional
equipotential bonding cable
In order achieve clean insertion, the use strip
holders recommended for the installation founda-
tion earth electrodes.4.4. bitumen lines
• Polymer-modified bitumen thick coating
• Impact-resistant plastic webs
• Heat insulation (perimeter insulation) the under-
side and side walls the foundations
• Additionally attached, capillary breaking, poorly
electrically conductive earth strata, e.
This grid ring earther must connected with the
functional equipotential bonding conductor and must
be executed follows either outside within the
floor plate:
• Grid width with lightning protection
measures
• Grid width without lightning protection
measures
Materials for foundation earthers and functional
equipotential bonding conductors
The following materials can used, amongst others:
• Galvanised steel flat conductors, 3.4404 1.4571. made re-
cycling crushed glass
For further information, see Chapter 2.5 mm
• Round conductors made stainless steel, Ø
10 mm
• Copper cable, mm²
OBO ProtectionBall (item no.g. The connection lugs
should clearly marked with protective caps during
the construction phase, e.5 mm
• Stainless steel flat conductors, 3. Either hot galvanised
steels with plastic jacketing rustproof stainless
steels with molybdenum content must be
used, e. 1. The foundation earth electrodes becomes a
functional equipotential bonding conductor. m.5 mm
• Copper cable, mm2
• Round conductors made galvanised steel, Ø
10 mm
• Round conductors made stainless steel, Ø
10 mm
Connection lugs
Connection lugs must made materials with per-
manent corrosion protection.4.
This the case when using:
• Water-impervious concrete according DIN EN
206 and DIN 1045-2 (white trough)
• Bitumen seals (black trough), e. necessary, insert trans-
verse conductors, order create grid x
20 the earth electrodes not have the neces-
sary contact with the earth electrodes the founda-
tion, then grid ring earther should additionally in-
stalled.g.g.
Materials for ring earthers
The following materials can used for the grid ring
earther:
• Stainless steel flat conductors, 3
