Poznámky redaktora
.3.2 NO.+50°C frost allowed
40..8 1.01% nominal speed
Dynamic accuracy:
0. with 100% torque step
0...0....+70°C
Storage -40.95 (total)
ISU: (fundamental)
ISU: 0..1.98 (fundamental)
c 0.2004
..14-95, available later
C-Tick, available later
GOST R
EMC (according EN61800-3)
2ndenvironm ent unrestricted distribution standard
1st environm ent restricted distribution options 1000 input
current
8 3AFE 68248531 REV 31.±100 with /dt filters
Field weakening point 8...8..Technical specification
.+70°C
O peration 0..0.93...13.......150 10m /s2
(1 g)
3.±300 Hz, 0.2% sec.300 Hz
M otor control software Direct Torque Control (DTC)
Torque control:
Open loop
Closed loop
Open loop
Closed loop
Torque step rise time:
<5 with nominal torque
<5 with nominal torque
Non-linearity:
±4% with nominal torque
±1% with nominal torque
Speed control:
Open loop
Closed loop
Open loop
Closed loop
Static accuracy:
10% otor slip
0..50°C reduced output current
(1% /1°C)
Cooling method: Dry clean air
Altitude 0.4000 m
w ithout derating
with derating
(690 units 1000..
No conductive dust allowed
IEC60721-3-1, class 1C2 (chemical gases),
Class 1S2 (solid particles)
IEC60721-3-2, Class 2C2 (chemical gases),
Class 2S2 (solid particles)
O peration
Vibration
Vibration Marine
Classification
IEC60721-3-3, Class 3C2 (chemical gases),
Class 3S2 (solid particles ithout airinlet
filters)
IEC60068-2-6, 10.100 /s2(0.0 mm
13.... with 100% torque step
Environmental limits
Am bient tem perature
Transport -40...99 (total)
Efficiency %
97 with IGBT supply unit
Motor connection
Voltage 3-Phase outp voltage ...U3in/U 5in//U 7IN
Frequency 0.075 mm
displacem ent plitude 58.7g)
displacem ent plitude
C chemically active substances
S mechanically active substances
Product compliance
C E
Low Voltage Directive 73/23/EEC with endm ent 93/68/EEC
M achinery Directive 98/37/EC
EMC Directive 89/336/EEC ith endm ent 93/68/EEC
Quality assurance system ISO 9001 and
Environmental system ISO 14001
UL, cUL 508A and 508C and CSA C22.58 0.
ACS800 X07 0003 XXXX
X04
Mains connection
Voltage and
power range
3-phase, U3IN 380 415 V,
3-phase, U5IN 380 500 V,
3-phase, U7|N 525 690 V,
(600 UL, CSA)
± 10%
± 10%
± 10%
Frequency Hz
Power factor 0..2000 with derating)
Relative humidity 95% condensation allowed
Protection class IP21 (Standard)
(cabinet) IP22, IP42 and IP54 *)
Protection class IP00 R2i-R5i
(m odules) IP00 R6i R8i
*) option
R all outlet air duct connection
Paint colour
Contam ination levels
Storage
Transportation
cabinet RAL 7035, modules: NCS 1502-Y,
RAL 90021, PMS 420 C...0.4% sec..3..1000 m
1000.
