Poznámky redaktora
3 (Braking Chopper Unit External Resistor)
Hardware
Optional inverter output isolator
Optional customer signal I/Os
Varnished control boards
Mechanics
Vibration dampers
Maritime handgrips for doors
Anticondensation heaters
Locking device for 90° open doors
Flame-retardant properties
Halogen-free wiring and cable ducts
Redundancy
Various redundancy schemes
(please contact ABB for further information)
17 ACS 6000 ABB
.Data sheet ACS 6000
General features
Inverter type
Voltage Source Inverter Neutral-Point Clamped
(VSI-NPC)
Motors
Induction, synchronous and permanent magnet
motors; 3000 000 kVA water cooled
Standards
IEC 60146, IEC 60721
All common standards including EN, IEC, CE
Marine standards optional
Input
Medium voltage input transformer for 12-pulse
diode rectifier, 6-pulse ARU
Variation: ±10 nominal voltage, down to
-25 safe operation with derated
output
Auxiliary voltage
Common 400 690 VAC, 3-phase,
50 Hz/60 Hz
UPS (Uninterruptable Power Supply)
If available, UPS can connected for control
power supply, 110-240 VAC, single phase or
110/220 VDC.
- Actual feedbacks: ready/running, current/
voltage/power etc.8 (Resistor Braking Unit Internal Resistor)
2.3 kV
Optional: 2.3 kV
Ambient temperature
+5 (higher with derating)
31 113 (higher with derating)
Enclosure classes
Standard: IP32
Optional: IP54
Control interface (optional)
All common fieldbuses including Profibus,
Modbus, DeviceNet, ABB AF100, others
Industrial'7 Compatible (Level 1)
Protective functions
Converter:
Overcurrent, short circuit, earth fault,
phase loss, overvoltage, undervoltage, over
temperature, output frequency, network
disturbance, cooling supervision
Motor:
Overload, underload, stall protection
Optional
• Motor supervision I/Os
- Fault/alarm: overtemperature, vibration of
bearings
- 100: winding bearing temperatures
• Transformer supervision I/Os
- Fault/alarm: overtemperature, overcurrent
- 100: winding temperatures
• Hardwired signals: drive control and drive
status indication
- References: start/stop, speed/torque etc.
• Braking chopper
Maritime properties
Marine standards
IEC 60092, IEC 60721-3-6, IEC 60068-2-
(1,2,6,30,52)
CE marking according directives
Marine certification
Available for Lloyd’s, DNV, ABS and others
Braking
0. Alternatively the drive can be
equipped with back-up capacitors (for short
term control power-loss ride-through)
Output frequency
0 ±75 (Twin 250 Hz)
Rated output voltage
Standard: 3.0 3
