Poznámky redaktora
0317 02
Order No. The lighting dimmed or
switched off when daylight grows stronger. presence detector capable evaluating even slight
movements (fine motion), typical when working offices. 10sec 30min
Brightness: approx.664 Gira electrical installation systems
Lighting control System 2000 presence detector automatic control switch
I
Technical
information
System 2000 presence detector
Komfort top unit
Order No.
.5
m
Detection field
Function
A presence detector used switch the light indoors case of
detection, depending the brightness, and then switch off when
no longer needed, bright enough without lighting one is
nearby.
-
Manual operation with auxiliary unit button, contact.
Further properties
-
Expansion the detection range through use auxiliary units (acces-
sories).5m
Number lenses detection
levels: 80/6
Rated voltage: See System 2000 insert
Switching capacity: See technical data inserts
Switch-on time: second test mode,
approx.
-
Light switched off: more motion detected and the delay time
has lapsed. The “presence” person detected, depending the set
brightness. 10sec 30min
Brightness: approx.
-
Test mode short-term operation.
Range detection
The diameter the detection range dependent the
installation height and the direction motion. For this purpose, the
automatic control switch 360° top unit detects motion heat from peo-
ple, animals objects. Pres-
ence detectors are mounted exclusively ceilings and monitor area
below them.
The Komfort presence detector top unit not suitable for alarm sys-
tems. The lighting switched on
or made brighter when daylight weakens. The Komfort presence detector reacts the movement of
heat triggered people, animals and objects. 20m for installation height 3m. When movement is
detected below adjustable brightness value, the light switched on. 2270 04
Technical data
Angle detection: 360º
Nominal range: 20m
Mounting height for nominal
range: 3m
Number lenses detection
levels: 78/5
Rated voltage: See System 2000 insert
Switching capacity: See technical data inserts
Switch-on time: second test mode,
approx.
-
Light switched on: Brightness has fallen below the set brightness
threshold and the monitored area entered.
The automatic control switch 360° top unit switches illumination
depending motion and ambient brightness. Then
the lighting dimmed that the brightness maintained the set-
point value set the presence detector. lx
3 m
∅ m
Detection field
Function
The automatic control switch 360° top unit will used together with
the System 2000 inserts release (check wireless actua-
tors).
For extension the detection field, the presence detector combined
with auxiliary insert for presence detectors (3-wire) and connected to
the main unit. The dimming procedure is
designed such way that the user hardly even notices the light con-
trol.
-
Day mode. 2270 02
Order No. 1000 lx
1. The maximum diameter
on the ground is
approx.
-
Saving memory value, with dimming inserts.
The device remains switched long further motion detected
and the lighting required.7
m
2.
-
LED display.
-
Dimming the light, with dimming inserts.
System 2000
Automatic control switch 360°
top unit
Order No.
Constant lighting control
When used dimming insert, constant light control possible. built into the ceiling and monitors the area below it. 0317 04
Technical data
Angle detection: 360º
Nominal range desk height: 5m
Nominal range the floor: 8m
Mounting height for nominal
range: 2
