Poznámky redaktora
-
- Dimming function: single-surface and double-surface operation,
time between dimming and switching, and dim-step size can be
set, telegram repetition and stop telegram transmission possible.
-
- The connection the outputs made via flexible, approx.
Technical data
KNX medium: TP1-64
Rated voltage: 250 50/60 Hz
Switching current: A
Relay contact: zero-voltage contact
Connected load
-
- Light bulbs: 2500 W
-
- halogen lamps: 2200 W
-
- Wound transformer: 1000 VA
-
- Gira Tronic transformer: 1000 W
-
- Capacitive load: max.: 1068-02,
cavity wall, Kaiser Order No.
-
- Output can parameterised contact contact
-
- Selection preferred position for bus power failure and
recovery.: 9062-74.: 9062-94, halogen-free, Kaiser
Order No. unit PS
Gira electrical installation systems Price system (PS) 14: reduced discount
KNX
system
devices,
actuators,
sensors
Features
-
- Free assignment the functions switching, dimming, blind and
value transmitter the inputs.
-
- Switching function: two independent switching objects are
available for each existing input and can enabled individually,
command for leading and trailing edge can set independently
(ON, OFF, CHANGE, reaction). The two inputs can perform various functions be
blocked independently each other the process.
-
- Blocker for blocking individual inputs. long connection line, which may extended a
maximum length m. Zero-voltage contacts can connected the two binary
inputs.
-
- Switch-on/off delay time switch function can set. unit Specifications Order No.
-
- The factory settings assign Input "1" the switching actuator,
enabling operation without programming. 105 µF
Number inputs: zero-voltage
Flush-mounted actuators KNX switching actuator, 1-gang.
-
- The binary inputs and KNX bus are connected via 6-wire,
approx.
Technical data
Ambient temperature: +45 °C
Dimensions mm
W 28
Notes
-
- For installation device box (electronics box from Kaiser
recommended).
Flush-mounted 105900
1059 1/100 06
COptional accessories
Rocker btn 2-way m-c 2-g 0155 D226
Junction box 0070 D202
Features
-
- Flush-mounted switching actuator, 1-gang with two binary
inputs.
-
- Behaviour upon bus voltage recovery can configured
separately for each input.
-
- Value transmitter and light scene auxiliary unit function: edge
(button contact, button contact, switch) and value
with edge can configured, value adjustment with button by
pressing and holding button for value transmitters possible, light
scene auxiliary unit with memory function and saving the
scene without previously calling possible.
-
- Blind function: Command can set with rising edge (no
function, UP, DOWN, CHANGE), operating concept can be
configured (Step Move Step Move Step), time between
short and long-term operation can set, slat adjustment time
can set.
-
- Output with three objects: switching, feedback, and additional
function (linking, block function, forced setting)
-
- Feedback object can inverted.
-
- VDE approval accordance with 60669-1, 60669-2-1. Flush-mounted, Kaiser Order No.508
KNX Flush-mounted actuators
Specifications Order No.
-
- Telegram rate limit.
20 long cable
