5 Testing earth electrode resistance (612. For this type sup-
ply necessary sink earth electrode into the general mass earth,
which then forms part the earth return conjunction with RCD.
6.
. Switch off the supply the main switch.
5.
Remove the test link and record the results schedule test results such
as that given Appendix the IEE Regulations.
2.
For satisfactory test result the ohmmeter continuity meter should read
very close zero for each test.71
Polarity test.7)
Low-voltage supplies having earthing arrangements which are indepen-
dent the supply cable are classified systems.
4.Electrical installations and wiring systems
357
The test done with the supply disconnected using ohmmeter con-
tinuity tester follows:
1. 14. Test between the ‘common’ terminal and earth each switch
position. the pin the right earth) and earth
at each socket outlet shown Fig.
3. Fix temporary link between the line and earth connections the
consumer’s side the main switch. Test between the live pin (i.
Lights
Switches
Sockets
Link
L N
Tester
C
C
C
FIGURE 14.71.e. Test between the centre pin any Edison screw lampholders and
any convenient earth connection. Remove all lamps and appliances
