Poznámky redaktora
-
- Surface mounted installation surface-mounted box (optional
accessories). m
Protection class: III
Protection type: IP44
KNX connection: Connection and junction terminal
Installation depth: mm
Ambient temperature: -25 +55 °C
Dimensions mm
-
- Ceiling cut-out: -
-
- Dimensions (with small
design ring): 53,5 38
Scope supply
-
- Small design ring included the scope supply.
-
- Brightness control can activated and deactivated via push
button with motion presence detectors.
KNX brightness controller
.
Brightness sensor with limit value monitoring
-
- three limit values can set the parameters.
-
- Extreme flat installation.
-
- Protection type IP44 allows installation outdoors and humid
rooms.
-
- When coupled the lighting system, lighting dimmed
(constant light control) switched (2-point control) depending
upon the daylight level.
-
- Transmission measured brightness value 2-byte value the
bus.
-
- Calibration sensor brightness value determined device via
independent reference measurement and bus telegram.
Technical data
KNX medium: TP1-256
Brightness sensor
-
- Measurement range: 2000 lx
-
- Detection range: approx.
-
- When the design ring has been removed, the programming
button the device can conveniently accessed from the
front. 2241 D503
Mount.
-
- Including block function.
-
- Cyclical transmission switching and dimming value commands
for light control. Transmission case modification, for read request, or
cyclically.
-
- Behaviour can configured following bus voltage recovery.
Features
-
- 2-point control (switching) constant light control (dimming
above value) can configured.
Flush-mounted 210200 2102 06
Surface-Mounted 210300 2103 06
Brightness Controller Mini
KNX brightness controller Mini
Brightness Controller
D Discontinued item. unit PS
Gira electrical installation systems Price system (PS) 14: reduced discount
KNX
presence
and
motion
detector
221000 2210 06
COptional accessories
Mount.
-
- KNX connection and junction terminal included the scope of
supply. unit Specifications Order No.kit install. five various dimmable light groups
can set via brightness value.502
KNX presence and motion detector Brightness Controller
Specifications Order No. Available until 12/2019.
-
- Limit value can changed using communication object or
teach-in.kit install.
-
- The switching, dimming value transmitter, light scene auxiliary
unit, and hysteresis functions can configured.
-
- Analyses the lighting conditions the area beneath it.
-
- 2-point control: "automatic switch-on only" and "automatic
switch-off only" lighting are possible.
-
- Constant light control: max.
-
- Terminal mounting suspended ceilings.
-
- The colour emphasis the design rings enables their colours to
be adapted the wall ceiling. 2242 D503
Features
-
- The brightness controller mounted the ceiling directly above
the area illuminated, for example above workplace.
-
- Specified setpoint value for brightness control via parameter or
via the bus with 2-byte communication objects.
-
- Ceiling mounting stable ceilings device box accordance
with DIN 49073 using optional accessories.
Technical data
KNX medium: TP1-256
Ambient temperature: +45 °C
Protection class: III
Measurement range: 2000 lx
Dimensions mm
-
- Flush-mounted without lid: 15
-
- Surface-mounted without
light conductor: D
Notes
-
- Brightness control can activated and deactivated via button
or with motion presence detectors
