MDT technologies GmbH Papiermühle 51766 Engelskirchen Germany
Telephone: +49 (0) 2263 880 knx@mdt.0
3..
Only "Repetitions" "0"
Table Settings Alarm
Sensitivity
This parameter used set the sensitivity the shock sensor.. After the last repetition the alarm telegram, the alarm detection automatically reactivated. Strong
vibrations the pane frame also trigger alarm.
Interval time
This parameter sets the interval time between repeatedly sent alarm telegrams. The value ‘0’ means that repetition
takes place and the object only transmitted once the event alarm.
Repetitions
Specifies how often the alarm message repeated telegram.de 19
Technical Manual
KNX RF+ Window Handle, Secure [RF-FGxS.
Interval time .
Note: Many repetitions shorter battery life..
Important: The alarm function the window handle must not integrated into burglar alarm system or
used prevent damage property.1 Statutory requirements)
The following table shows the available settings:
ETS text
Dynamic range
[Default value]
Comment
Sensitivity not active
■ low
■ medium
■ high
■ verv high
Sets the sensitivity the shock sensor
Repetitions .
If the sensitivity too high, other vibrations the pane may also trigger alarm.mdt. 59
[1]
Determines how often the alarm repeated. this case, the
sensitivity the alarm function should reduced, especially this occurs frequently.de www.
As long the set number repetitions has not yet been reached, the alarm detection remains deactivat-
ed. (Chapter 5.3 Vibration alarm
The MDT Window Handle detects typical burglary scenarios such prising open forcing open.01S]
State
12/2025
-
Version
1. ss
[05 ss]
Interval time (in seconds) between alarm
repetitions.2..
