Poznámky redaktora
3:
Typical movement desk,
e.
Automatic mode
The device records thermal motion people, animals objects.
Functions via app
-
Set the device presence detector motion detector. 500 (and day mode)
approx.20m 14.5m 14m 9m
4. movement upper body.00m 28m 18m 15m*) -*) m
6. 6m
Range detection
at mounting height:
- Desk: 6m
- Floor: 20m
Brightness threshold:
- Motion detector mode:
- Presence detector mode:
approx.00m 26m 17m 14.
-
Occupancy simulation.
-
Reset factory setting.50m 16.5m 11.5m 6m
2.
Diameter detection range for direction motion
Mounting
height
1: 4:
2.
2:
Radial motion the floor.5m,
otherwise fine detection not possible. The diameter the detec-
tion field dependent the installation height and the direction of
motion people the detection field.00m 29m 19m -*) -*).
-
Clip-on panel limit the detection field. The range detection increases
as the installation height increases, but the detection density and sensi-
tivity decrease.5s
- Pulse pause: approx.661
Gira electrical installation systems
Presence and motion detector 360° top unit Lighting control
I
Technical
information
System 3000 presence and
motion detector 360º top unit
BT
Order No.
4:
Fine detection the desk,
e.20m max.
Range detection
The diameter the detection range dependent the installation
height and the direction motion people the detection field. 3s
Wireless frequency: 2,402 2,480GHz
1. mouse movements.00m 20m 16m 12m 8m
3.5m 13m 10m 7m
3.
-
Switch-off pre-warning.
-
Light dimmable via auxiliary unit, with dimming insert. 5377 02
Technical data
Ambient temperature: -5°C +45°C
Angle detection: 360º
Number sensors: PIR C)
Sensitivity: 25, 50, 75, 100%
Mounting heights: min.
-
Walking test. 1000 (and day
mode)
Short-term operation
- Pulse duration: approx.5
m
Detection field
Functions directly the top unit
-
Expansion the detection range combination with the 3-wire auxil-
iary unit.
-
Operation with 2-wire, 3-wire auxiliary unit, rotary dimmer auxiliary unit
or push button.
Functions combination with dimming insert
-
Switch stored switch-on brightness. 0.
3 m
∅ m
Detection field
Detection field and range
The device has range detection 360°. 2.
-
The light turned off when:
No more motion detected the detection area and the delay time
expires
or
the ambient light bright enough and the delay time has expired. The motion
detector adapts the ambient conditions order keep the time as
short possible.
-
The delay time re-started with every motion detected.
Ranges for:
1:
Tangential motion the floor.
-
Timer off for 0.
-
The light switched the range detection entered and the set
brightness threshold not met.7
m
2.
-
Set the brightness threshold.
*)
When used presence detector:
Mounting height not above 3. The
maximum diameter the detection field the ground 20m for
a mounting height 3m.
-
Set the sensitivity the three PIR sensors separately.
-
Delay time setting.
To prevent switch-on because cooling light source, motion sig-
nals are evaluated for short locking time after switch-off.50m 23m 18.
-
Permanent-on, permanent-off.5 hours.5m*) -*) m
5
