Connection SCHUKO socket outlet with overvoltage protection
Functional description
Socket outlet for the protection sensitive electrical and electronic
devices from voltage spikes (transient overloads). The socket outlet separates the protective branch from
the mains network via thermal release during thermal overload (due to
overloads which occur too frequently and strong overloads).
-
Other socket outlets can connected the RCD-protected output
terminals (L’ and N’).5 mm2
max.
-
In multiple combinations, other standard socket outlets used the
combination are also protected (when installed the same phase)
when socket outlet with overvoltage protection used.5 2.. 2664.
-
We recommend using additional medium and coarse protection with
high-power overload pulses.
RCCB 30mA
Order No.. VDE 0664.
-
Do not lay protected cables parallel unprotected cables.626 Gira electrical installation systems
RCD-protected socket outlet and RCCB socket outlet with overvoltage protection
I
Technical
information
SCHUKO socket outlet
16A 250V~ with overvoltage
protection
Order No..
T
RCD-protected socket outlet
30mA with integrated increased
contact protection (shutter) and
symbol
Order No. 0451.5kA (ISCCR)
Protection level (L/N): 1.5 2.
Information operation
-
Keep cables between consumers and overvoltage protection socket
outlets short possible, max. audible
signal emitted.25kV (UP
)
Protection level (L/PE; N/PE): 1..
-
Residual current protection applies all devices cables connected
to the RCD-protected socket outlet the RCCB. The socket outlet supplies connected devices with
mains voltage, but does not protect them.
Technical data
Overvoltage protection: Arrester type (one port)
Rated voltage: 230V 10%)
Mains frequency: 60Hz
Maximum continuous voltage: 255V (UC)
No-load voltage: 4kV (UOC
Rated load current: 16A (IL
)
Short-circuit protection: 1. There a
risk surge voltage coupling.
-
This device works like residual current circuit breaker.5kV (UP
)
TOV characteristics: 442V/5s/120min (UT
)
Circuit breaker: max. 4m.
Features
-
The socket outlet used device protection (fine protection)
-
Disconnection the signal tone unplugging the power plug. 2677.
L‘ N‘
L
N
L
PEN
TN-C
AC 230 V~
L‘ N‘
L
N
L
N
PE
TN-S
AC 230 V~
Connection diagram TN-C mains Connection diagram TN-S mains
L‘ N‘
L
N
L
N
TT main
PE
AC 230 V~
Connection diagram mains
Functional description
Socket outlet for use areas which residual current devices pursuant
to VDE 0664 are indicated, for example in
-
rooms with bathtub shower (DIN VDE 0100, Part 701)
-
indoor swimming pools (DIN VDE 0100, Part 702)
-
agriculture (DIN VDE 0100, Part 705)
-
classrooms (DIN VDE 0100, Part 723). 16A (gG/C)
Ambient temperature: -5°C 25°C
Relative humidity: 95% (without condensation)
Connection sensor head 1.
Technical data
Rated voltage: 230V~
Rated current: 16A
Rated fault current: 30mA
Connection cross sections: 1. The
socket outlet must replaced professional electrician.
. varistor reduces
excess voltages. m
AC 230 V~
0451 0188 .
-
Electrical installations upstream the RCD-protected socket outlet or
RCCB are not protected.5mm²
Ambient temperature: -25°C +40°C
Function
-
The devices RCD-protected socket outlet and RCCB are permanently
installed protective devices with voltage-dependent residual current
tripping acc
