Poznámky redaktora
KNX components can started directly via ETS Version or
higher. These could e.
-
- Command when the rocker pressed (right and left button) can
be set the parameters (lighter ON, darker OFF).
-
- With scene auxiliary unit: Memory function possible. unit Specifications Order No. While
KNX devices (TP twisted pair (green bus line)) are positioned
where there are lines, KNX pushbutton sensors and hand-held
transmitters can mounted independently lines, these RF
transmitters Gira are battery operated. The suitable rocker set for the design line must
be ordered separately. mW
Range (free field): approx.R mode) standard are compatible with each
other.
KNX RF1.
-
- The pushbutton sensor supplied with program-neutral
start-up rocker.g. This means, for example, that also possible to
implement status displays the operating points addition to
the operating function, enable status feedback for actuators.
-
- The range can reduced when using rocker sets and/or cover
frames.
-
- Project planning, start-up and parameter setting are performed
using ETS (version later). The
following descriptions, including combination, generally identify
products for the same KNX standard. additional software gateway required.
-
- Command when the rocker pressed (right and left button) can
be set the parameters (ON, OFF, CHANGE).R
Start-up mode: mode
Rated voltage: V
Batteries: 2450N
Ambient temperature: +45 °C
Wireless frequency: 868.
Features
-
- Confirmation function well transmit and status display via
two-colour LED (red/green) separately for each button 2-stage
display function. addition, alternatively, suitable KNX RF
actuators can controlled directly KNX transmitters.456
KNX KNX system description KNX pushbutton sensors
Specifications Order No.
-
- Command when the rocker pressed (right and left button) can
be set the parameters (values 255, 100% scene
number). KNX pushbutton sensors
can mounted anywhere operating point required, on
stone walls, concrete, wood glass the surface furniture.
KNX devices can connected wired KNX installations using
media couplers.
-
- Battery-operated device.
telegrams for switching/pressing, for dimming blind control. Often the same KNX system used under different
names product descriptions simply for marketing reasons.
Please observe the regulations the disposal used batteries.
"Switching" function
-
- Rocker button function.
-
- Optional status display separate 1-bit status communication
objects. Devices from other manufacturers which also comply
with the KNX RF1.
-
- Command for pressing and releasing can parameterised (ON,
OFF, CHANGE, reaction).
-
- Transmit and confirmation display deactivatable.R mode) standard just like the Gira KNX devices
themselves. Mobile hand-held
transmitters allow comfortable operation the intelligent KNX
building functions remote control.
"Blind" function
-
- Rocker function. is
also possible program encoder functions (dimming encoders and
scene auxiliary units). KNX RF
devices are connected directly system using KNX RF/TP
media coupler.
"Value transmitter" and "Scene auxiliary unit" functions
-
- Rocker function.
KNX system description KNX pushbutton sensors
.3 MHz
Transmission power: max. KNX components
have transmitter and receiver component and result are
bidirectional. 100 m
Notes
-
- Batteries are consumables and must replaced regularly.R mode
KNX Ready mode
KNX RF+
The KNX pushbutton sensors transmit KNX telegrams wirelessly
when the button pressed, depending the parameter settings
when the application program loaded.
-
- Time between short and long-term command can set the
parameters. This compulsory and must comply with the KNX
RF1.
-
- The pushbutton sensor can attached walls using screws or
affixed smooth transparent surfaces using mounting plate.
Technical data
KNX medium: RF1.
Scope supply
-
- Batteries are included the scope supply.
"Dimming" function
-
- Rocker function. unit PS
Gira electrical installation systems Price system (PS) 14: reduced discount
KNX
RF
The Gira KNX system (RF radio frequency) based a
manufacturer-independent KNX wireless standard (868 MHz),
which can easily retrofitted existing KNX systems used to
expand new installations with components