Introduction to Electrical Engineering

| Kategorie: Kniha  | Tento dokument chci!

Pro: ČEKO IMPORT a.s.
Vydal: České vysoké učení technické Praha Autor: Vladimír Kůla, Michal Kříž

Strana 94 z 112

Jak získat tento dokument?






Poznámky redaktora
In case measuring instruments and auxiliary appliances protection Class (cathode ray oscilloscope, sine wave generator), where the protective conductor interrupted facilitate testing, e.ERECTION AND OPERATION ELECTRICAL TEST EQUIPMENT 95 11.1 Emergency switching off Test equipment shall provided with means for emergency switching off order cut off all electrical energy which could result danger.3. adequate number manual controls shall provided inside and outside the test area appropriate the size the area and complexity layout. No clamping devices shall permitted for this purpose. . outlets the general power supply within the test area, shall identified accordingly, they are not interrupted the emergency switching off equipment.3. because the enclosure has isolated from earth potential, the appliance shall be supplied from isolating transformer . Protection against electric shock The test assembly shall arranged and designed that the protection against direct contact is secured insulation live parts, covers, enclosures, obstacles safe distances. safe distance ensured, when the person carrying out tests cannot reach the prohibition zone with parts his/her body tools.g. indicator lights. Where several persons are involved test, two- hand control device shall provided for each person the personnel and which are so connected that all the two hand controls are required operated before the test supplies can be energised. Safety test probes shall have the adequate insulation level for the applied test voltage.g. Test equipment and test areas shall clearly and visibly indicated means warning signs. Safety can also means two-hand control device the use of two safety probes apply the test voltage. 11. Test equipment shall have devices which indicate the operational status, e. The test assembly shall designed and arranged order prevent the transfer of voltage extraneous conductive parts. An effective protective measure for protection case fault (protection against indirect contact) shall provided. If circuit and/or the enclosure measuring instrument auxiliary appliance designed for mains connection connected live parts the test assembly which can carry voltage to earth, then the internal insulation the supplying isolating transformer shall rated least to this voltage. The test equipment controls and test circuits shall clearly identified.g. Connection points, e