Blinking, occupies command button
The Switching Actuator starts blink.
OFF with Advance Warning, occupies command button
Staircase function which switches immediately and switches OFF after adjustable time.The Switching Actuators Output is
blinking seconds before switches OFF. Does not switch the output already OFF.5s)
Activate Lock, occupies command button
Locks the actuator against any further operation other sensors with normal functions, the lock can permanently (can only be
released sensor with „Release Lock“ function) after defined lock time (10 minutes hours), the output action for Lock
and Release Lock can defined (ON, OFF, old value)
Release Lock occupies command button
Releases the Lock and allows operation the actuator normal functions again, the output action for Release Lock can be
defined (ON, OFF, old value)
No Function, occupies command button
Has function, however the actuator will send Resend the RF-command group
Functions available:
.EATON WIRELESS SYSTEM
92
Functions overview for actuators Comfort Mode (by means MRF-Software and PC)
For each sensor assigned (max. sensor per actuator) the following different functions can selected:
CSAU-01/01-10IE Switching actuator functions that can selected Comfort Mode
ON OFF (Standard Basic-Mode)
Switches OFF
ON Switch-on delay time, occupies command button
On Command which executed immediately after adjustable delay time
OFF with Switch-Off delay, occupies command button
Off Command which executed immediately after adjustable delay time. case delay time >0s the output will switch
ON immediately and switch OFF after the delay time.You can adjust the interval time and the ON/OFF duty cycle (1-99% minimum value cannot
be <0.
OFF Switch-OFF delay, occupies command button
Off Command which executed immediately after adjustable delay time.
Push-button/Key Mode, occupies command buttons
The Switching Actuator only while its sensor activated; otherwise OFF
Surge, occupies command button
The Switching Actuator toggles with every sensor activation its output value
