This function particularly important case frequent switching.
Note: ZCS only for Output and Output (metered and switched power outputs). The output
control completely independent from the WiFi LAN communication
subsystem.1 Features
ZCS (Zero Current Switching)
ZCS (Zero Current Switching) function ensures that the relay contact closed
at the moment zero voltage and opened the moment when zero current
flows through it.
Closing and opening these exact moments has number advantages:
The negative effects inrush current the lifetime the relay the
NETIO device are significantly reduced.7
3. With servers in
particular important avoid undesired momentary switching.
Possible settings for NETIO device
- On
- Off
- LAST state restores the last state before the power was disconnected
ZCS
Zero Current
IOC
Independent IO
PowerUp
state
.
Significantly reduced electromagnetic interference caused repeated switching and off.
IOC (Independent Output Control)
Independent Output Control function the NETIO device uses independent
system that ensures stable operation the output even the main system
is being restarted, updated, booting.
For some applications, important set the correct state power
output immediately after power turned (or restored).
Reduced probability circuit breaker tripping the circuit branch
where the appliance with high inrush current connected.
PowerUp State
The PowerUp State parameter (sometimes also called Cold start) defines the
behavior the 110/230V power output during the first milliseconds seconds
after powering the device, before the LAN/WiFi communication with a
master system established.
Significantly improved lifetime switching supplies appliances that are connected the
socket (especially case frequent switching and off).
Thanks IOC, the controlled output can power devices that, for technical
reasons, must powered without interruption (such servers).
Zero current switching (ZCS) significantly improves the lifetime the NETIO device and the
connected end devices
