… and press fully home.. However, three contact elements
must always retained.
Fitting and changing cross-connections
The fitting and changing cross-connections
is trouble-free and fast operation:
– Insert the cross-connection into the cross-
connection channel the terminal.5 10-pole combs and
ZQV2.
If the user shortens the cross-connections is
necessary use end plates with the terminals in
order maintain the rated voltage 250 (at the
bare, cut edges the cross-connection)..Accessories Electrical distribution
Breaking out contact elements
If one more (max. for reasons stability
and temperature rise) the contact elements are
broken out the cross-connections, terminals may
be bypassed suit the application.48
B
Terminals,P-Series
1282250000 2012/2013
.
Caution:
Contact elements must not
be deformed!
The time-saving, easy-to-use cross-connection combs
for terminals, featuring PUSH technology.5/20 continuous (20-pole)
• ZQV 6/N 4-pole combs and
ZQV6N/20 continuous (24-pole)
• ZQV 16/2 2-pole comb (link)
These versions come with complete
shock protection.
Shortening cross-connections
Cross-connections can shortened length
using suitable cutting tool, e. ZQV (order no.
Plug-in cross-connection ZQV
B.)
– Remove cross-connection simply prising out
with screwdriver.
However, please note that the rated voltage is
reduced 400 when using cross-connections.
• ZQV 2. (The cross-connection
may not project from the channel.g.
This does not apply terminals with a
rated voltage below 400 Here the rated
voltage the used terminal mandatory.
9002170000)
