5/20 continuous (20-pole)
• ZQV 2.5N/20 continuous (20-pole)
• ZQV 10-pole combs and
ZQV4/20 continuous (20-pole)
• ZQV 4-pole combs and
ZQV6/32 continuous (24-pole)
• ZQV 10, ZQV and ZQV as
2-pole combs (bridges)
• ZQV 35-10, ZQV 35-16 and ZQV 16-10 used
as reducer cross-connector distributes current
from terminals with larger cross-connections to
terminals with smaller cross-section. for reasons stability
and temperature rise) the contact elements are
broken out the cross-connections, terminals may
be bypassed suit the application.
These versions come with complete shock
protection...)
Pluggable Cross-Connection ZQV
C
Terminals,Z-Series
C.)
with the terminals order maintain the rated
voltage 250 (On the bare, cut edges the
cross-connector.
Caution:
Contact elements must not
be deformed!
The time-saving, easy-to-use cross-connection comb
for terminals, featuring tension clamp technology.
This does not apply terminals with a
rated voltage below 400 Here the rated
voltage the used terminal mandatory.. ZQV (order no.Accessories Z-Series Electrical supply
Breaking out contact elements
If one more (max.5 10-pole combs and
ZQV 2.
… and press fully home.
If the user shortens the cross-connections is
necessary use isolating end plates (ZAP/TW.136 1282250000 2012/2013
. However, three contact elements
must always retained. (The cross-connection
may not project from the channel.
Fitting and changing crossconnections
The fitting and changing cross-connections
is trouble-free and fast operation:
– Insert the cross-connection into the cross-
connection channel the terminal.
However, please note that the rated voltage is
reduced 400 when using cross-connections.)
– Remove cross-connection simply prising out
with screwdriver..
Shortening cross-connections
Cross-connections can shortened length
using suitable cutting tool, e.
9002170000).
• ZQV 2.g.5N 10-pole combs and
ZQV 2