Poznámky redaktora
km
Cop. Test to
DIN 4102 part 12.pairs x
cross-sec.
Insulation integrity under direct
flame propagation for the test period
of 180 minutes. Tests acc.pairs x
cross-sec. 73,2 Ohm/km
Ⴠ Temperature range
flexing -5°C +50°C
fixed installation -30°C +70°C
Ⴠ Core identification with colour rings and
ring-groups DIN VDE 0815
Ⴠ 180: Insulation integrity for 180
minutes.
Ⴠ Screening with alu-laminated polyester tape
and solid copper drain wire 0,8 Ø
Ⴠ
Ⴠ Outer sheath halogen-free, flame retardant
to DIN VDE 0207 part 24, HM2
Insulation resistance
min.
mm
Part no. 120 nF/km 800 Hz
(this values may extended at
20% with make-up pairs)
Tests
Ⴠ Flame test acc.
The functionality for minutes assures
when persons and animals are saved
from burning building. Weight
app. Test
method DIN 4102 part 12.to DIN VDE 0472
part 814 IEC 60331. DIN VDE 0482
part 1034-1+2, DIN 61034-1+2,
IEC 61034-1+2, 7622 part 1+2
(previously DIN VDE 0472 part 816)
Ⴠ Caloric load values
see Technical Informations
Note
Ⴠ 90
Functionality (burning behaviour) is
dependant corresponding installation
technique. Suitable for fixed installation
everywhere, where case fire human life and material assets are protected and safety conciousness take special significance, in
industrial complexes, public buildings, hotels, airports, under ground railway networks, hospitals.
Functionality 30
Functionality 90
Weight
app.
Ⴠ LS0H Low Smoke Zero Halogen
Application
Static screened installation cables for telecommunication purposes.
weight
kg km
Outer Ø
app. to
DIN VDE 0482-332-3, 4066 part 3,
DIN 60332-3, IEC 60332-3 (previously
DIN VDE 0472 part 804 test method C)
Ⴠ Capacitance unbalance
max.JE-H(St)HBd fire warning cable, 180/E (red), halogen-free
Properties
Cable structure
Technical data
Ⴠ Bare copper-conductor, single-wire
Ⴠ Ⴠ
Flame retardant, halogen-free
installation cable, adapted to
DIN VDE 0815
No fire propagation
Ⴠ
Ⴠ Low smoke density
Core insulation halogen-free, cross-linked
polymer HI1, flame retardant (E90 with
special foil wrapping over
conductor)
Ⴠ Not for purposes high current
and power installation well as
underground laying
Ⴠ Loop resistance
max.
= The product conformed with the Low-Voltage Directive 2006/95/EC. km
Cop.
mm
Part no. 100 MOhm km
Ⴠ Sheath colour red, RAL 3000 with imprint
"BRANDMELDEKABEL"
Ⴠ Mutual capacitance
max.
The functionality for minutes assures
the functional performance of
water-pressure-rising stations for the
supply avoid smoke and heat in
safety-stairs and inner rooms, ladder shafts
and engine rooms for fire brigade lifts,
emergency lifts for sickbeds hospitals
and the fire brigade lifts.
-
74,0
25,0
7,4
2 0,8
34091 -
67,0
25,0
7,5
2 0,8
34157
-
103,0
45,0
9,3
4 0,8
34158
-
127,0
45,0
10,8
4 0,8
34092
-
300,0
85,0
16,9
8 0,8
34093 -
168,0
85,0
11,4
8 0,8
34159
-
237,0
126,0
13,0
12 0,8
34160
-
336,0
126,0
18,5
12 0,8
34094
-
426,0
166,0
20,1
16 0,8
34095 -
303,0
166,0
15,7
16 0,8
34161
-
361,0
206,0
16,5
20 0,8
34162
-
529,0
206,0
22,2
20 0,8
34096
-
859,0
326,0
29,1
32 0,8
34097 -
553,0
326,0
20,3
32 0,8
34163
-
699,0
407,0
23,4
40 0,8
34164
-
1094,0
407,0
34,2
40 0,8
34098
-
1280,0
529,0
37,3
52 0,8
34099 -
865,0
529,0
25,2
52 0,8
34165
Dimensions and specifications may changed without prior notice. mm
No.
Ⴠ Radiation resistance
up 100x106 cJ/kg (up 100 Mrad)
Ⴠ Smoke density acc. The static screen prevents strong interference impulse. 200 pF/100 (20% the values, but
one value 400 allowed)
Ⴠ Corrosiveness combustion gases
acc. (RQ02)
580
Energy- and Power Cable Low Voltage and Security Cables
.
weight
kg km
Outer Ø
app. mm
No. DIN VDE 0482 part 267,
DIN 50267-2-2, IEC 60754-2
(equivalent DIN VDE 0472 part 813)
Ⴠ Minimum bending radius
6x cable Ø
Ⴠ 90: Functionality electrical cable
systems for minimum minutes. minutes
secures the functional performance the
fire warning and alarm systems, safety and
spare lighting, passenger lifts with
evacuation circuits, except the cables which
are installed within the ladder shafts and
engine rooms.
Ⴠ Cores twisted pairs, each pairs consist
to unit, several units stranded layers
Ⴠ Operating peak voltage
225 (not for purposes of
high current and power installation)
Ⴠ Units identified with numbered tape
Ⴠ Core wrapping with special polyester and
glass-fibre tape
Ⴠ Test voltage
core/core 500 V
core/screen 2000 V
Ⴠ 30: Functionality electrical cable
systems for minimum minutes
