Pohybový detektor
... pro bezpečnost, pohodlí a úspory energie
in fračerven á absorce
Detektory pohybu jsou často určené
pro detekci pohybu zdrojů tepla v
jejich detekčním dosahu a automaticky
spínají připojená světla.
Infračervený snímek:
Ten je vyvolán pomocí pasivní infračervené
technologie. To znamená,
že integrované infračervené senzory
zaregistrují tepelné záření a převedou
ho na elektrický signál. Samotné
čidlo nevysílá žádné záření a
proto je označováno jako pasivní
infračervený senzor (PIR senzor).
• possible, maintain the recommended installation height 2. The more parallel detectors are
connected, the larger and more confusing the coverage range becomes.g. min.20 meters, GH-detectors for great installation heights
up 10.
• The switched lights must not placed the detector's coverage range (e.) 600 Lux
• Visually intensive jobs 1000 Lux
• Brightness measurement deactivated ("sun" symbol) for areas without daylight
or during daytime/night-time operation
Switch-off delay time for lighting control
• Transit areas approx.
• not switch master occupancy detectors parallel.
Correct connection
• Never connect more than five devices parallel.
Trees, bushes, switching fan heaters, fans, all devices that generate heat sources etc. With several
motion detectors connected parallel, connected consumers might not switch off (can
normally solved using component). lighting
underneath the detector), indirect lighting must not throw its cone lights directly onto
the detector.
If possible, always mount the detector lateral the direction people and vehicles are
moving.APPLICATION
EXAMPLES
140
I lkin towards
W lkin across
Seated aller motions
The optim installation location
• The area monitored must completely covered the detector's coverage area.
• Ensure clear view: globes, windows, partitions, furniture, plants, suspended lights and
installations limit the detector's coverage area. That means
complicated connections can lead time-consuming troubleshooting.00 meters (flush-
mounted wall detectors 1.
• Pay attention sources interference the coverage area.00 meters). Economically-priced slave devices
are available increase the coverage area (please comply with the corresponding
circuit diagrams).
(non interfering sources are: heating radiators, computer, sunny areas, room ventilation
systems).
Pay attention the various ranges for "sitting", "direct approach" and walking across".
The correct settings
Brightness value
• Transit areas 300 Lux
• Work areas (offices, meeting rooms etc.10 2. min.
• Impulse operation trigger facility control systems
• Alarm impulse prevent spurious triggering
.
• Impulse operation second) for triggering automatic staircase lighting switches
and facility control systems
Switch-off delay time for device control
• Depending the type consumer connected, 120 min.
• Maintain minimum clearance meter from switched lights.
• Work area approx.50 3
